Imprimer

Sodium chlorure 99.0-100.5% (base substance sèche), granuleux USP, FCC, Macron Fine Chemicals™

Marques : Avantor Performance Materials
Ratings: Ecrire un avis

Total Evaluation: 0
Moyenne des Notes : 0.0 sur 5

Attention

Synonyme(s): Chlorure de sodium

C7532-19EA 0 EUR
C7532-19 MACR7532-04 7532-20 MACR7532-13 MACR7532-06 7532-28 MACR7532-25
Sodium chlorure 99.0-100.5% (base substance sèche), granuleux USP, FCC, Macron Fine Chemicals™
Sodium chlorure
Formule: NaCl
Poids moléculaire: 58,44 g/mol
Point d'ébullition: 1413 °C (1013 hPa)
Point de fusion: 801 °C
Densité: 2,16 g/cm³ (20 °C)
Température de stockage: Température ambiante
Numéro MDL: MFCD00003477
Numéro CAS: 7647-14-5
EINECS: 231-598-3
Indice Merck: 14,08599

Commander maintenant

Résultats des tests de spécification

Meets F.C.C. Requirements
Food GMP Manufactured Product
GMP Manufactured Product
Meets U.S.P Requirements
CAUTION: For Manufacturing, processing or repackaging
Bulk Pharmaceutical Chemical
Bulk Food Chemical
USP - Assay (NaCl)(USP) (dried basis) 99.0 - 100.5 %
USP - Identification A Passes Test
USP - Identification B Passes Test
USP - Loss on Drying at 105°C ≤0.5 %
USP - Acidity or Alkalinity Passes Test
USP - Iodide (I) Passes Test
USP - Barium (Ba) Passes Test
USP - Magnesium and Alkaline Earth Metals (as Ca) ≤100 ppm
USP - Arsenic (As) ≤1 ppm
USP - Nitrite (NO₂) (Absorbance Value) ≤0.01
USP - Sulfate (SO₄) ≤200 ppm
USP - Phosphate (PO₄) ≤25 ppm
USP - Iron (Fe) ≤2 ppm
USP - Bromide (Br) ≤100 ppm
USP - Appearance of Solution Passes Test
USP - Ferrocyanide Passes Test
USP - Aluminum (Al) ≤0.2 ppm
USP - Potassium (K) ≤500 ppm
FCC - Assay (as NaCl) (FCC) (ignited basis) 99.0 - 100.5 %
FCC - Identification A Passes Test
FCC - Identification B Passes Test
FCC - Arsenic (As) ≤1 ppm
FCC - Calcium and Magnesium ≤0.35 %
FCC - Heavy Metals (as Pb) ≤2 ppm
FCC - Loss on Drying at 105°C ≤0.5 %
Solubility (10 in 50) Passes Test
Appearance (white, crystalline granules, slightly hygroscopic)
No Class 1,2,3 or other solvents are used or produced in the
manufacturing or purification of the product.
Must be subjected to further processing during the preparation of
injectable dosage forms.
Elemental Impurities (USP 232, EP 5.20) - Information on elemental
impurities for this product is available on the associated Product
Regulatory Data Sheet and elemental impurity profile report.

Learn more

About VWR

Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...

Plus About VWR